PT.SANKI CRANES INDONESIA
Leading Heavy Lifting Solutions
+62-21-5055-4684
+62-21-5055-4686
MULTIPLE SPEED HOISTS
1
UR-Type Series
Inverter technology and creep speed technology are combined to make a variable speed hoist for twenty-first century.
Specification
Capacity : 1/2 - 3 tons
Hoisting Speed : Varies from 0.8 - 8.0 m./min.
Traversing Speed : Varies from 2.5 - 25 m./min
Power supply:
3-phase 200v 50/60hz control 200V, 220V 60Hz control 220V
(400V class is also available)
3-phasehz control 200V, 400V 60Hz control 220V
3-phase380V control 48V(100V and 24V are also available)
Operating method :
Push button switch operations
1/2t-3t
Suspended type: 2 points
Frame Mounted type : U D
Motor operated traversing hoist :6 points U D E W S N
"Above push button are all 2 step push button excluding ON AND Off"
Applicable standard :
JISC9620 Electric Hoists, Crane structure standard.
Rating:
hoisting 25%. ED(63% of rating load), 150S/Hr JISC9620, Travelling troller type)
Ambient air temperature:
-10C-40C ( Non congelation)
Ambient relative humidity :
Less than 90% RH
( Non condensening)
Enclosure :
Simplified outdoor type (JISC 0920, Equivalent to IP44)(rainproof cover is required when it used in the open air)
speed trversing is set to25/2.5m/mn at shipment.
Color Coating :
main body:
Metallic gray ( Equvalent to Munsell N$.0)
Hook block:Munsell 7.5YR7/14Note: this hoists can not be use for lift( Elevator for passengers)
Remarks :
High lowering is contactor operation, speed is 6m.min in 1t and 6.7m/m in 2t-2.8tfor the power supply is 50Hz.
Lifting low speed is ser to 1/10 of high speed at shipment High speed travesing low speed traversing is set to25/2.5m/min at shipment.
Caution:
UR series are not possible to use for the liftWhen the winding creep is done, it is not possible to operate smootly by the taversing resistance.
Pease contact us.We recommend the installation of the noise filter because it might mis operate in thpoint whre a lof of power supply noises exist.
Please contact us when you use the product in a lot of spaces such as the causticity gas and dust that are.
Speed range of lfting and loweing in low speed 40% of the display value in the rating load.
The speed difference between much load and no load grows at the time of low speed operating. too.
U2, HU2-Type Series
This series which Mitsubishi Original inverter specially developed for hoist has realized the miniaturization and versatility.
Specification
Capacity : ½ tons - 60tons
Hoisting Speed : variable from 0.3 to 13 m/min
Traversing Speed : variable from 2.5 to 25 m/minOverload Protection functionPosition detection device
No-Load High speed function
Power Supply :3-phase 200V 50/60Hz control 200V, 220V 60Hz control 220V(400V class is also avaliable)3 - Phase 400V 50/60Hz control 200V, 440V 60Hz control 220V3 - Phase 380V 50Hz control 48V (100V and 24V are also available)
Operating Method:
Push button switch operations
1/2t~3t 5t~45t
Suspended TypeFrame Mounted Type2 Points 4 PointsU D
ON OFF U DMotor operated Traversing Hoist6 Points
8 Points
U D E W S N
ON OFF U D E W S N
Above push buttons are all 2 step push buttons excluding "ON" and "OFF"
Comes with various type :
Single Girder Type
Low head Type
Double Rail Type
Suspended Type
Frame Mounted Type
Rating:
Hoisting (less than 5t) 40%ED (100% of load rating).
400S/Hr(More than 7.5t) 25%ED (100% of load rating). 150S/Hr JIS C 9620Traversing 30 min (JIS C 9620)
Power Supply System:
Cable feeding, trolley feeding (only double trolly)Ambient Air Temperature:10°C to 40°C (Non Congelation)Ambient Air Humidity:90% or less (Non Condensing)
Enclosure:
Simplified out door type (JIS C 0920, equivalent to IP-44)
Please Prepare the shelter place or the installation of rian cover when it is used in outdoor.
Applicable Standard:
JIS C 9620 electric hoist/crane structure standard.
Color Coating:
Main Body : Metallic gray (Equivalent to Munsell N4.0)
Hook Block : Munsell 7.5YR7/14
Pushbutton : Equivalent to Munsell 7.5YR7/13
Mitsubishi Hoists